Engineering resources

Practical guidance for better manufacturing decisions.

Clear explanations for design engineers, sourcing teams and product developers working with CNC machining and custom manufacturing suppliers.

Company News

Company News

New equipment, team growth, trade shows and factory updates from MIM Machining.

MIMCNC CNC machining workshop with machine tools and operators

Company News 4 min read

Why Choose MIMCNC? Precision Manufacturing Built Around Your Parts

Discover how MIMCNC supports precision CNC projects through appropriate process selection, multi-axis machining, project-specific inspection and coordinated surface finishing. From a single prototype to repeat production, learn how clear technical requirements and practical communication help purchasing, engineering and supply chain teams move from drawings toward parts ready for assembly.

Read article

Technical Insights

Technical Insights

Practical guidance on materials, finishes, tolerances and manufacturing processes.

CNC machined aluminum fixture and polymer tooling insert prepared for production inspection

CNC Tooling Guide 11 min read

CNC Machined Jigs and Fixtures vs 3D Printed Tooling

A production tool should be selected from its duty rather than from the manufacturing process that is easiest to buy. This guide compares machined metal, printed polymer and hybrid tooling for locating, clamping, guiding and inspection tasks, then turns the decision into a quote-ready specification.

Read article
Precision CNC machined aluminum housing under surface and dimensional inspection for defect prevention

CNC Quality Guide 12 min read

CNC Machining Defects: Causes, Inspection and Prevention

A rejected CNC machined part rarely has one obvious cause. Chatter, burrs, dimensional drift, tool marks and distortion can begin with geometry, stock condition, workholding, tool wear, heat, chip evacuation or an unclear acceptance method. This guide helps engineering and quality teams connect the visible symptom to evidence, corrective action and a better manufacturing plan.

Read article
Thin-wall CNC machined aluminum housing supported for precision milling and dimensional inspection

CNC DFM Guide 12 min read

Thin-Wall CNC Machining: Design, Fixturing and Inspection Guide

Thin-wall CNC machining is a stiffness and process-control problem, not a single minimum-thickness number. Wall height, unsupported span, material, stock condition, tool engagement, clamping and measurement state determine whether a lightweight housing or enclosure can be machined and inspected consistently.

Read article
Process comparison showing Swiss-type guide-bushing turning beside conventional fixed-head CNC turning

Precision Turning Guide 11 min read

Swiss Machining vs CNC Turning: How to Choose for Small Precision Parts

Swiss machining is usually the stronger candidate for small, slender parts that need support close to the cut and several turning or live-tool operations in one cycle. Conventional CNC turning is often the simpler, more economical choice for short, rigid rotational parts. The correct route depends on the complete drawing, bar stock, feature access, quantity and inspection plan—not on diameter alone.

Read article
Liquid silicone rubber diaphragms, sealing rings and fluid-control components

Elastomer Material Guide 12 min read

LSR vs TPE: Choosing a Flexible Material for Injection Molded Parts

Choose liquid silicone rubber when the application genuinely needs silicone-specific temperature, weathering, electrical or long-term sealing behavior and dedicated LSR tooling is justified. Choose a thermoplastic elastomer when thermoplastic processing, broad hardness and overmolding options, recyclability of clean process scrap or simpler material handling better fit the product. The final grade must be selected from tested service conditions—not from the words ‘silicone’ or ‘rubber-like’ alone.

Read article
Five precision CNC machined aluminum housings on a clean white background

CNC Materials Guide 10 min read

6061 vs 7075 Aluminum for CNC Machining: How to Choose

6061 and 7075 are both established aluminum alloys for CNC machined parts, but they solve different engineering problems. The practical decision is not simply “general purpose versus aerospace.” It depends on load, stiffness, corrosion exposure, joining, finishing, stock form, dimensional stability and the evidence required on the drawing.

Read article
Large CNC machined aluminum housing compared with a fabricated sheet metal enclosure in a clean industrial workshop

Manufacturing Process Guide 9 min read

Large Metal Parts: CNC Machining vs Sheet Metal Fabrication

A large metal component does not automatically belong on the largest available machine. Some designs need a rigid machined body with controlled bores and datums; others are more practical as cut, formed and joined sheet-metal assemblies. This guide helps engineering and sourcing teams choose the route from the drawing instead of from part size alone.

Read article
Red anodized CNC machined aluminum parts on a white background

CNC Machining Guide 10 min read

Surface Finishing for CNC Machined Parts: A Practical Guide

Surface finishing is not simply a cosmetic step after machining. The selected process can change corrosion behavior, wear resistance, electrical contact, color, texture and final dimensions. This guide gives engineers, product designers and buyers a practical framework for specifying surface finishing for machined parts without treating any finish as universally best.

Read article
Precision CNC machining supplier evaluation with machined housing, CMM inspection and modern CNC equipment

Sourcing Guide 10 min read

How to Choose a Precision CNC Machining Supplier

A capable precision CNC machining supplier should do more than return a low unit price. Engineering access, process ownership, inspection evidence, material control and clear quotation assumptions determine whether a custom part can move from drawing review to repeat production with fewer surprises.

Read article
Small-batch CNC machining workflow with one prototype and a repeatable batch of precision aluminum housings

Production Guide 10 min read

Small-Batch CNC Machining: From Prototype to Production

Small-batch CNC machining gives engineering teams production-like parts without committing to dedicated high-volume tooling. The value comes from using each batch to stabilize the design, manufacturing route and inspection plan before demand increases.

Read article
CMM inspection of a CNC machined aluminum component during an RFQ quality planning review

Sourcing & RFQ 10 min read

CNC Machining RFQ Checklist: What to Send for an Accurate Quote

A quote-ready CNC machining RFQ package gives engineering and procurement teams comparable proposals with fewer assumptions, clarification cycles and late requirement changes. Use this machine-shop RFQ checklist to organize the files, specifications and commercial context a supplier needs before pricing custom CNC parts.

Read article

Case Studies

Case Studies

Manufacturing challenges, project decisions, solutions and inspection workflows.

Start with the commercial page

Need manufacturing support now?

Explore a capability page for product examples, project workflow and RFQ guidance.

Aerospace Turned PartsCNC Machining5-Axis HousingsSheet MetalMedical CNCLSR Injection Molding

Turn engineering questions into a manufacturable RFQ.

Send the key project details and our manufacturing team will respond with a focused next step.